Push Floor Systems
Application: for rectangular and square supply equipment, silos with a discharge lengths of to 14 m (46')
Material to be conveyed: uncut/uncrushed material, edge length max. 0.5 m (1,8")
Output Range: up to 20 m3/hr. (706 ft3)
Technology: Depending onthe size of the supply equipment the LAMBION-push floor consists of two or more push floor rods incl. carrier. The number of push floor rods is not limited and depends on the width of the storage area. The push rod itselfs is made of a carrier profile on which the thrusting wedges are arranged at specified intervals across the thrust direction. A hydraulic lifting cylinder is mounted to the end of the support rail, moving the push rod back and forth. During the forward motion the thrusting wedges brace against the discharge material and push it through the discharge port.
Rotary Spiral Auger Discharge System
Application: for round supply equipment with a diameter of 4 to 12 m (13 to 39')
Material to be conveyed: cut/crushed material
Output Range: up to 40 m3/hr. (1,400 ft3)
Technology: The machine consists of a 360 degrees rotatable discharge head with drive, pivoted in the centre of the silo floor. The discharge screw is mounted with single sided bearings inside the discharge head, the fuel is carried to the centre of the discharge head and down from there. The combination of screw auger rotation with the simultaneous rotation of the discharge head allows for a continuous, well controllable discharge from round silos, and safely avoids fuel bridging in the silo.
Leaf Spring Auger Discharge System
Application: Round silos with a diameter of up to 5 m (16' 5") and a height of 10 m (32'm 9")
Material to be conveyed: light cut/crushed fuels with a particle size of 50 mm (2")
Output Range: up to 5 m3/hr. (177 ft3)
Technology: The machine consists of a screw auger, which is securely mounted inside the silo, an agitator with flat spring arms and an attached loosening screw is installed at the end of the auger inside the silo. The discharge screw is operated by a continuously speed adjustable motor, enabling adaptability to fluctuating fuel structures. Due to its simple structure and for smaller system scales, it is an economically interesting alternative to a Rotary Spiral Auger Discharge System.
Moving Auger Discharge System
Application: for rectangular and square supply equipment with a discharge lengths of up to 5 m (16' 5") and a discharge width of up to 8 m (26' 3")
Material to be conveyed: uncut/uncrushed material, edge length max. 0.3 m (1')
Output Range: up to 10 m3/hr (354 ft3)
Technology: Two screw spirals are arranged parallel to each other across the discharge system and are hydraulically moved in a reciprocating motion over the entire silo area. The combination of the screw turning simultaneously to the lateral movement allos for a continuous, well controllable discharge from rectangular storage spaces and at the same time avoids fuel bridging in the silo.
